Skip to main content

SMS Programming in C# Part 1

By
It's quite difficult to find resources regarding SMS programming with C#. Well, I have gathered through some other sites on how to program mobile phones (various models including Nokia N96). Before I write about C# (I'm using C# express 2008), let's have a look at the basics first. This first part will talk about connecting to your mobile phone and testing its connectivity.
  1. Be sure that you have your mobile phone driver installed.
  2. Connect your mobile phone
  3. To test the connectivity of the phone and whether it responds to our commands, let us try hyperterminal. In XP, Start->All Programs->Accessories->Communications->Hyperterminal.
  4. Specify the Name of the connection.
  5. Choose the Communications Port (Usually, the mobile phone will from Com1 to Com3. To know which port the mobile phone is assigned to, go to Control Panel->Phone and Modem Options->Modems. It will list down all the modems attached to your PC).
  6. Specify the Bits per second, Data bits, Parity, Stop bits, and Flow Control. You may leave the default values.
  7. type in "AT" (without the quotes) to test the connectivity of the device. If it responds with "OK" then you can communicate with your device. Mobile phones have built-in AT commands that we can use to manipulate different functionalities.
Various AT commands are available for testing. Google them up, and there are many sites that give info about each command.


A good phone to test will be Nokia N96. You'll be sure that it will have the minimum (well not only the minimum) requirements for your programming needs. The best Nokia N96 deals can be found over the web. Best deals are on October.
Labels:

Comments

Post a Comment

Popular posts from this blog

Adding a Footer to the DataGridView component

By
I have been searching for sites and forums that would give me a any hint on having a footer on the .net DataGridView control. It was frustrating. I found some, but not what I was looking for. I use windows forms. It would have been easier if I was into web. I decided to create one for myself. It's not complete, but it works with me. It needs improvement and I hope that some programmers who might pass through this blog will help me with it :D. Limitations: Cannot set Footer values during design time. Can sometimes hide a row when scrolled to the last item in the grid. What I did was just create a user control that inherits the DataGridView control and add a StatusStrip to act as the footer. public partial class MyDataGridView : DataGridView { public StatusStrip Footer { get { return (StatusStrip)this.Controls["Footer"]; } } private bool _footerVisible; [Browsable(false)] /// /// Sets or Gets the va...
1 comment
Read more

Using Crystal Reports 10 with C#.net and Firebird

By
C# express doesn't include a report designer or viewer. Reports however, is very much needed when creating a business software. Since C# express doesn't include a report designer, we need to find other means. One is to use a free report such as MyNeoReport. This however may not work under many circumstances. The other alternative would be to use a proven report engine and designer-Crystal Report. Crystal Report has been used by many developers (in our city). However, using a free programming language and IDE, and a free database is very limiting. Not much information can be gathered on the net either (with regards to reporting as of this writing). Here's a way to use Crystal Reports using Firebird database and C# Express as software development IDE: Pre-requisites: C# Express 2005 EMS SQL Manager 2005 for InterBase & Firebird Lite Crystal Reports 10 Create the following database: Name: TestDB1 Tables: TESTTABLE1 Columns:  ID - PK, INTEGER,AUTOINCREMENT DES...
6 comments
Read more

Open a Lenovo 3000 G410 Battery

By
One of the common problems with laptops is the deteriorating performance of its battery. Laptop batteries are made up of Lithium Ion (Li-ion). I have a laptop that is more than a year old. Last week, its battery went totally dead. I'm still looking for a replacement. I'm very careful in finding one because most cheap alternatives are poor in performance (with only 45 mins up time compared to the original 3-4 hours). Some are overly priced. I now have a prospect seller and will be purchasing after this post. Well, to continue, out of my curiosity, I opened the battery. The laptop is a Lenovo 3000 G410. Before my exploration, I took the specifications of the battery. It turned out that it's manufactured by SANYO. Here are the specifications: Battery name: PABAS024 Unique ID: 3658QSANYO PABAS024 Chemistry: LION I really don't have any knowledge about the hardware. All I know is that it can be charged and discharged. Despite my limited knowledge, I still opened it up ...
Post a Comment
Read more